水果紙箱設計需要考慮哪些要素,穩定性：穩定性是任何產品都有的要求。水果紙箱設計的穩定要求分為兩部分，一是材質的穩定性上，即是指材質各方面是要無有害物質。二是盒子結構上的穩定，即是要求盒子的結實度等很好的保護產品。適應性：要求水果紙箱設計出來的要能適應各種場景，如運輸、儲藏、銷售及使用。要能保證盒子在各個場景下都能適應，這是水果紙箱要滿足的要求。
What factors should be considered in the design of fruit carton? Stability: stability is a requirement for any product. The stability requirements of fruit carton design are divided into two parts. One is the stability of materials, that is, all aspects of materials should be free of harmful substances. The second is the stability of the box structure, that is, the firmness of the box and other well protected products are required. Adaptability: the fruit carton shall be designed to adapt to various scenarios, such as transportation, storage, sales and use. To ensure that the box can adapt to all scenarios, this is the requirement that the fruit carton should meet.
易量產：設計的再好看的盒子不能實現批量生產也沒用的。因此設計出的盒子要能夠實現大批量的快速生產，同時成本不能太高。可循環利用：隨著全球環境變暖，人們對越來越重視。水果紙箱做為運用量非常大的物品，因此水果紙箱設一定考慮因素。不管是在材質的選擇上還是，結構上都要考慮的材質跟節省材質的方案。
Easy mass production: no matter how good-looking the box is designed, it is useless if mass production cannot be realized. Therefore, the designed box should be able to realize mass rapid production, and the cost should not be too high. Environmental protection and recycling: with the global warming, people pay more and more attention to environmental protection. The fruit carton is used in a large amount, so the environmental protection factor must be considered in the design of the fruit carton. Environmental friendly materials and material saving schemes should be considered both in material selection and structure.
在水果紙箱的使用過程中，容易出現水果紙箱破損，而水果紙箱的存在就是為了保護水果紙箱內部的產品，所以為了保護產品就會對水果紙箱的質量有一定的要求。由于紙箱破損影響了紙箱的使用性，那么究竟水果紙箱為什么會易破損呢？是由什么原因引起的呢？ 瓦楞紙板的厚度達不到需求：由于瓦楞輥在使用過程中會遭到磨損，使得瓦楞紙板的厚度達不到規則的需求，使得紙箱的抗壓強度偏低，紙箱強度也會降低
In the process of using the fruit carton, the fruit carton is easy to be damaged, and the existence of the fruit carton is to protect the products inside the fruit carton. Therefore, in order to protect the products, there will be certain requirements for the quality of the fruit carton. As the damage of the carton affects the usability of the carton, why is the fruit carton easy to be damaged? What causes it? The thickness of corrugated board can not meet the demand: because the corrugated roller will be worn in the process of use, the thickness of corrugated board can not meet the regular demand, resulting in the low compressive strength of carton and the reduction of carton strength.
紙箱的瓦楞變形：為什么會發生瓦楞變形呢？是由于紙板自身較軟,平面強度低,剛性也低,用這樣紙板制成的瓦楞紙箱相對來說抗壓強度和拆穿強度也小。這是由于瓦楞的形狀與瓦楞紙板的抗壓強度是有直接聯系。紙箱打印規劃不合理：瓦楞紙板的瓦楞形狀和布局,決定了瓦楞紙板的承壓力。
Corrugated deformation of carton: why does corrugated deformation occur? Because the paperboard itself is soft, low plane strength and low rigidity, the corrugated box made of such paperboard has relatively small compressive strength and tear through strength. This is because the shape of corrugated board is directly related to the compressive strength of corrugated board. Unreasonable carton printing planning: the corrugated shape and layout of corrugated board determine the bearing pressure of corrugated board.
壓力的巨細和接受面積的巨細是影響紙箱抗壓強度的一個首要要素，打印對瓦楞紙板會形成必定損害。若是打印壓力過大,會將瓦楞壓潰,楞高降低。特別是在壓線處打印時,為了在壓線部位進行強迫的、明晰的打印會將整個紙板壓潰，使紙箱抗壓強度大幅度降低。
The size of the pressure and the size of the receiving area are the primary factors affecting the compressive strength of the carton. Printing will cause certain damage to the corrugated board. If the printing pressure is too high, the corrugated will be crushed and the corrugated height will be reduced. Especially when printing at the line pressing position, in order to force and clear printing at the line pressing position, the whole paperboard will be crushed and the compressive strength of the carton will be greatly reduced.
紙箱的粘合強度較差：判別紙箱的粘合好否,只需用手扯開粘合面,若是發現原紙面被剝壞,則闡明紙頁粘合得好。若是發現楞峰粘合處無撕毛的紙纖維或呈白粉狀,則闡明是假粘,這會形成紙箱的抗壓強度偏低,并影響到整個紙箱的強度。紙箱的粘合強度與紙張的等級、粘合劑的制作和制作設備及技術操作有關。總結：基于以上幾點，在生產水果紙箱時應注意紙箱厚度要符合規定，紙箱打印要合理，尤其要注意紙箱的粘合強度以及紙箱的瓦楞強度。注意了以上幾點，有助于挺高紙箱的使用壽命，有效地保護水果紙箱內部的產品。較好的辦法是稱重。重量是紙質無法做假的一個坎，也是根本的。硬度和厚度。這也是一個重要的參數，硬度高不一定厚，厚也不一定硬度高。表面光澤度。
Poor adhesion strength of cartons: to judge whether the adhesion of cartons is good or not, you only need to pull off the bonding surface by hand. If the original paper surface is found to be stripped, it indicates that the paper is well bonded. If it is found that there is no torn paper fiber or white powder at the ridge peak bonding, it is clarified that it is false adhesion, which will cause the low compressive strength of the carton and affect the strength of the whole carton. The adhesive strength of carton is related to the grade of paper, the production of adhesive, production equipment and technical operation. Summary: Based on the above points, in the production of fruit cartons, we should pay attention to the thickness of cartons to meet the regulations, the printing of cartons to be reasonable, especially the adhesion strength of cartons and the corrugated strength of cartons. Paying attention to the above points will help to improve the service life of the carton and effectively protect the products inside the fruit carton. A better way is to weigh. Weight is not only a barrier for paper to be fake, but also fundamental. Hardness and thickness. This is also an important parameter. High hardness is not necessarily thick, and thick is not necessarily high hardness. Surface gloss.
Vegetable packaging manufacturers have provided you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://www.chengshei.cn We will have more content for you to check later.
